The P-06 is the .40 S&W version of the 9mm CZ 75 P-01 model.
The P-01 9mm was designed for LE and Military duty, but its compact size and the reduced weight due to its forged alloy frame made it ideal for discrete carry as well. Equipped with a decocker, the P-01 provides convenience for those who prefer hammer-down carry.
The P-01 was the first CZ model to benefit from updated manufacturing technology at CZ's Uhersky Brod factory. The components of the P-01/P-06 are completely interchangeable with every other P-01/P-06, with no individual fitting required. This required some very careful re-design so that the reliability and accuracy were not impaired. Since the time of its introduction (designed in 2001, NATO-approved in 2003) the production upgrades have been rolled out to most of the CZ 75 family and several new rifle models as well. The 1913 accessory rail easily accepts any of the industry-standard lights and lasers to assist low-light use. The P-01 is the only NATO-spec pistol on the market that is available to the public. After 3 years of some of the most aggressive small arms testing ever, the CZ P-01 won the honor of replacing the CZ 75s previously used by the Czech National Police.
The U.S. Army "Mean Rounds Between Failure" (MRBF) requirement is 495 rounds for 9mm pistols. During testing of the CZ P-01, the average number of stoppages was only 7 per 15,000 rounds fired. This is a .05% failure rate or an MRBF of 2142.
Weight: 1.820 lbs
Overall Length: 7.200 in
Barrel Length: 3.880 in
Height: 5.310 in
Width: 1.380 in
Frame: light alloy
Trigger Mech.: SA/DA
Safety: Decocking Lever, Safety Stop on Hammer, Firing Pin Safety